Roll Rod Mounting Bracket

Remove the engine room under cover.
(refer to Engine And Transaxle Assembly - "Engine Room Under Cover ")
Remove the roll rod bracket (A).
Tightening torque

Bolt (B):

107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb.ft)

Bolt (C):

49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb.ft)

Fig 1: Locating Roll Rod Bracket With Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Remove the roll rod support bracket (A).
Tightening torque :

49.0 - 68.6 N.m (5.0 - 7.0 kgf.m, 36.2 - 50.6 lb.ft)

Fig 2: Locating Roll Rod Support Bracket With Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.