Engine Mounting Bracket

Remove the engine room under cover.
(refer to Engine And Transaxle Assembly - "Engine Room Under Cover ")
Install the jack to the edge of oil pan to support the engine.

Fig 1: Installing Jack To Edge Of Oil Pan
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Insert the rubber block between jack and oil pan.
Remove the engine mounting support bracket (A).
Tightening torque

Nut (B):

78.5 - 98.1 N.m (8.0 - 10.0 kgf.m, 57.9 - 72.3 lb.ft)

Bolt (C), Nuts (D):

58.8 - 73.5 N.m (6.0 - 7.5 kgf.m, 43.4 - 54.2 lb.ft)

Fig 2: Locating Engine Mounting Support Bracket, Nut And Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Separate the reservoir tank to obtain space for remove the engine mounting bracket.
(Refer to Cooling System - "RESERVOIR TANK ")
Remove the engine mounting bracket (A).
Tightening torque :

49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb.ft)

Fig 3: Locating Engine Mounting Bracket With Bolts And Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.