LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Soul ! >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System Diagnosis - 1.6L T (3 Of 3) >> DTC P2123: Throttle / Pedal Position Sensor / Switch D Circuit High Input >> DTC Inspection >> Monitor KDS/GDS Data

Monitor KDS/GDS Data

  1. Connect KDS/GDS to DLC (Data Link Cable).
  2. Warm up the engine to normal operating temperature.
  3. Check the "Current Data" about related DTC with KDS/GDS.
    Fig 1: Screen Display - Engine Idle After Warm Up & Approx. 2000RPM & At Acceleration
    G12282689Courtesy of KIA MOTORS AMERICA, INC.
  4. Are the parameters displayed correctly?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or PCMs connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification Of Repair " procedure.

    NO 

scientia non olet · About LEMON Manuals