Repair Procedures: Removal

Release the residual pressure in fuel line. (Refer to "Release Residual Pressure In Fuel Line ")
Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
Remove the second row seat. (Refer to "REAR SEAT ")
Remove the rear seat LH air duct (A) after loosening the mounting nuts.

Fig 1: Removing Rear Seat LH Air Duct
Courtesy of KIA MOTORS AMERICA, INC.
Remove the seat cable bracket (A) after loosening the mounting nuts.

Fig 2: Removing Seat Cable Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump service cover (A) after loosening the mounting screws.

Fig 3: Removing Fuel Pump Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel feed tube quick-connector (A), fuel pressure sensor connector (B), fuel pump control module (C) and fuel tank pressure sensor (D).

Fig 4: Disconnecting Fuel Feed Tube Quick-Connector & Fuel Pressure Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump plate cover (A) by using the special service tool (B) [No.: 09310-B8100].

Fig 5: Removing Fuel Pump Plate Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump (A) from the fuel tank.

Fig 6: Removing Fuel Pump From Fuel Tank
Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: View Of Fuel Pump
Courtesy of KIA MOTORS AMERICA, INC.