LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

[Valve 1] 

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the mounting nut (C), and then remove the valve from surge tank.
Fig 1: Disconnecting Variable Intake Solenoid Valve 1 Connector
G12181570Courtesy of KIA MOTORS AMERICA, INC.

[Valve 2] 

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the mounting nut (C), and then remove the valve from surge tank.
Fig 2: Disconnecting Variable Intake Solenoid Valve 2 Connector
G12181571Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals