LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  4. Disconnect the crankshaft position sensor connector (A).
  5. Remove the mounting bolt (B), and then vertically remove the sensor from the transaxle housing.
Fig 1: Disconnecting Crankshaft Position Sensor Connector
G12181489Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals