[Resistance Inspection]
- Turn the ignition switch OFF.
- Remove the OTS. (Refer to "Removal ")
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
- Check that the resistance is within the specification.
| Temperature | Resistance (kΩ) | |
|---|---|---|
| °C | °F | |
| -40 | -40 | 52.15 |
| -20 | -4 | 16.52 |
| 0 | 32 | 6.0 |
| 20 | 68 | 2.45 |
| 40 | 104 | 1.11 |
| 60 | 140 | 0.54 |
| 80 | 176 | 0.29 |
| 100 | 212 | 0.16 |
| 120 | 248 | 0.10 |