Repair Procedures: Removal

1. Turn the ignition switch OFF.
2. Disconnect the battery sensor connector (A) and battery negative (-) terminal.

   Battery negative (-) terminal tightening nut: 

   4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)

   Fig 1: Disconnecting Battery Sensor Connector

   Courtesy of KIA MOTORS AMERICA, INC.
3. Disconnect the battery.

   (Refer to "REMOVAL ")

4. Remove the battery sensor & battery negative (-) cable assembly after loosening the sensor cable mounting bolt (A).

Battery sensor & battery negative (-) cable assembly mounting bolt (Chassis ground): 

21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 16.0 ~ 23.9 lb-ft)

Fig 2: Loosening Sensor Cable Mounting Bolt

Courtesy of KIA MOTORS AMERICA, INC.