Repair Procedures: Replacement: Removal

CAUTION:

Put on gloves to protect your hands.

NOTE:

Use seat covers to avoid damaging any surfaces.

Remove the rear pillar trim.
(Refer to "REAR PILLAR TRIM ")
Loosen the quarter fixed glass (A) mounting nuts.
Tightening torque :

3.9 ~ 4.4 N.m (0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft)

Fig 1: Locating Quarter Fixed Glass With Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Cut out the sealant using the sealant cutting tool [A (09861-31000)].
NOTE:
- Do not scrape down to the painted surface of the body as bonding strength may get diminished on damaged paint.
Information
- Remove the rubber dam and fasteners from the body.
- Mask off surrounding surfaces before painting.
Remove the quarter fixed glass (A).

Fig 2: Locating Quarter Fixed Glass

G12172974

Courtesy of KIA MOTORS AMERICA, INC.