LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sorento SX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 2.0L T) >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Bank 1/Exhaust 

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the CVVT oil control valve connector (A).
  3. Remove the mounting bolt (B), and then remove the valve from the engine.
Fig 1: Locating CVVT Oil Control Valve Connector & Installation Bolt
G11862268Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals