Repair Procedures: Replacement

1. Remove the front seat assembly.

   (Refer to "FRONT SEAT ASSEMBLY ")

2. Disconnect the front seat belt buckle connector wiring (A).
   Fig 1: Locating Front Seat Belt Buckle Connector Wiring

   Courtesy of KIA MOTORS AMERICA, INC.
3. After loosening the mounting bolt, then remove the front seat belt buckle (A).

   Tightening torque  :

   39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

   Fig 2: Locating Front Seat Belt Buckle With Mounting Bolt

   Courtesy of KIA MOTORS AMERICA, INC.
4. Install in the reverse order of removal.

Information 

• Make sure the connector is plugged in properly.
• Replace any damaged clips.