LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sorento L >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the front driveshaft.

    (Refer to "FRONT DRIVESHAFT ")

  2. Remove the TJ joint assembly.

    (Refer to "TJ JOINT ")

  3. Remove both sides of band (B) of the dynamic damper (A).
    Fig 1: Locating Band And Dynamic Damper
    G12171949Courtesy of KIA MOTORS AMERICA, INC.
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft With Vice
    G12171950Courtesy of KIA MOTORS AMERICA, INC.
  5. Apply soap powder on the shaft to prevent damaging between the shaft spline and the dynamic damper when removing the dynamic damper.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
Fig 3: Locating Dynamic Damper And Shaft
G12171951Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals