LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L T >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the intake manifold.

    (Refer to "INTAKE MANIFOLD ").

  3. Disconnect the injector connector (A).
  4. Remove the mounting bolt (B), and then remove the sensor from the cylinder block.
Fig 1: Locating Injector Connector And Mounting Bolt
G12170421Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals