LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L T >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Locating Engine Coolant Temperature Sensor Connector
    G12170399Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the spring clip (A), and then pull the sensor from the water temperature control assembly.
Fig 2: Locating Spring Clip
G12170400Courtesy of KIA MOTORS AMERICA, INC.
CAUTION: Note that engine coolant may flow out of the water temperature control assembly when removing the sensor.
scientia non olet · About LEMON Manuals