LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L T >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the resonator and the air intake hose.

    (Refer to INTAKE & EXHAUST SYSTEM - 2.0L T )

  3. Remove the intercooler inlet pipe & hose assembly (A).
    Fig 1: Locating Intercooler Inlet Pipe & Hose Assembly
    G12170376Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the ETC module connector (A).
  5. Disconnect the coolant hoses (B).
  6. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 2: Locating ETC Module Connector, Coolant Hoses & Installation Bolts
G12170377Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals