LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L T >> Boost Pressure Sensor (BPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air duct (A).
    Fig 1: Locating Air Duct
    G12170389Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the bar connector (A).
  4. Remove the mounting bolt (B), and then remove the sensor from the intercooler outlet pipe.
Fig 2: Locating Bar Connector And Mounting Bolts
G12170390Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals