LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sedona SX >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension System And Rear Alignment >> Rear Coil Spring >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the rear wheel and tire (A) from rear hub.

    Tightening torque  :

    88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

    CAUTION: Be careful not to damage the hub bolts when removing the rear wheel and tire (A).
    Fig 1: Removing Rear Wheel And Tire From Rear Hub
    G12273710Courtesy of KIA MOTORS AMERICA, INC.
  2. Support the jack and then remove the carrier bolt (B).

    Tightening torque  :

    156.9 ~ 176.5N.m (16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)

    Fig 2: Removing Carrier Bolt
    G12273711Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the spring (A), the upper pad (B) and the lower pad (C).
    Fig 3: Removing Spring, Upper Pad And Lower Pad
    G12273712Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.
  5. Check the rear alignment.

    (Refer to Rear Suspension System - "REAR ALIGNMENT ")

scientia non olet · About LEMON Manuals