LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sedona SX >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a nut.
Fig 1: Locating Immobilizer Unit
G12272070Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals