Engine Mounting Bracket

Disconnect the battery negative terminal.
Install the jack to the edge of the lower oil pan (A) to support the engine.

Fig 1: Install Jack To Edge Of Lower Oil Pan
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Insert the rubber block between jack and upper oil pan.
Remove the engine mounting support bracket (A).
Tightening torque

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Fig 2: Locating Engine Mounting Support Bracket With Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Separate the reservoir tank to obtain space for removing the engine mounting bracket.
(Refer to Cooling System - "RESERVOIR TANK ")
Remove the engine mounting bracket (A).
Tightening torque:

63.7 ~ 83.3 N.m (6.5 ~ 8.5 kgf.m, 47.0 ~ 61.5 lb-ft)

Fig 3: Locating Engine Mounting Bracket With Bolts & Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.