LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sedona LX >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  2. Remove the TJ joint assembly.

    (Refer to Repair Procedures  Driveshaft Assembly - "TJ Joint")

  3. Remove both sides of band (B) of the dynamic damper (A).
    Fig 1: Locating Band And Dynamic Damper
    G12264473Courtesy of KIA MOTORS AMERICA, INC.
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft With Vice
    G12264474Courtesy of KIA MOTORS AMERICA, INC.
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Seperate the dynamic damper (A) from the shaft (B) carefully.
    Fig 3: Locating Dynamic Damper And Shaft
    G12264475Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals