LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Sedona L >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Timing System >> Drive Belt >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Check belt for maintenance and V-ripped part for abnormal wear. Replace if necessary.
    NOTE:
    • Do not bend, twist or turn the drive belt inside out.
    • Do not allow the drive belt to come into contact with oil, water and steam.
  2. Visually check the belt for excessive wear, frayed cords etc.

If any defect has been found, replace the drive belt.

NOTE: Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced.
Fig 1: Check Belt For Excessive Wear, Frayed Cords
G12273416Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals