Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.
NOTE:
- Install the control shaft complete after setting the neutral state.
  
  Fig 1: Installing Control Shaft
  Courtesy of KIA MOTORS AMERICA, INC.
- Apply the sealant to the contact surface of transaxle and control shaft.
  Specified Sealant: Anaerobic adhesive for flange
  
  Fig 2: Applying Sealant To Contact Surface Of Transaxle And Control Shaft
  Courtesy of KIA MOTORS AMERICA, INC.