LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Rio SX >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Remove the front driveshaft. (Refer to "FRONT DRIVESHAFT ")
  2. Remove the TJ joint assembly. (Refer to "TJ JOINT ")
  3. Remove the remove the both side of band (B) of the dynamic damper (A).
    Fig 1: Removing Both Side Of Band Of Dynamic Damper
    G11845632Courtesy of KIA MOTORS AMERICA, INC.
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft
    G11845633Courtesy of KIA MOTORS AMERICA, INC.
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
Fig 3: Separating Dynamic Damper From Shaft
G11845634Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals