LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Rio SX >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
  2. Install the dynamic damper.
  3. Install the dynamic damper band.
  4. Using the SST (09495-3 K000), secure the TJ boot bands (A).

    Clearance (A):  2.0 mm (0.079 in) or less

    Fig 1: Securing TJ Boot Bands Using SST
    G11845635Courtesy of KIA MOTORS AMERICA, INC.
  5. Install the TJ joint assembly. (Refer to "TJ JOINT ")
  6. Install the front driveshaft. (Refer to "FRONT DRIVESHAFT ")
scientia non olet · About LEMON Manuals