Repair Procedures: Removal

NOTE:

Take care not to scratch the center fascia panel and related parts.
Eject all the disc before removing the audio unit to prevent damaging the CD player's load mechanism.

Disconnect the negative (-) battery terminal.
Using a screwdriver or trim remover, remove the center fascia panel (A).

Fig 1: Locating Center Fascia Panel
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the start/stop button connector (A) and hazard switch connector (B).

Fig 2: Locating Start/Stop Button Connector And Hazard Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
After loosening the mounting screws, then remove the audio assembly (A).

Fig 3: Locating Audio Assembly With Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the audio connector and cable (A).

Fig 4: Locating Audio Connector And Cable

Courtesy of KIA MOTORS AMERICA, INC.