LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Body Control Module Diagnosis (Except HEV)) >> DTC B163E-00: Rain Sensor Module LIN Fault >> Wiring Inspection >> Terminal and Connector Inspection

Terminal and Connector Inspection

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
  3. Has a problem been found?
    Fig 1: BCM Circuit Diagram
    G12138206Courtesy of KIA MOTORS AMERICA, INC.

    YES 

    NO 

scientia non olet · About LEMON Manuals