LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Driveshaft Assembly (Except HEV)) >> Dynamic Damper >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
  2. Install the dynamic damper.
  3. Install the dynamic damper band (A).
  4. Using the SST (09495-3K000), secure the TJ boot bands (B).

    Clearance (A):  2.0 mm (0.0787 in.) or less

    Fig 1: Locating TJ Boot Bands And Dynamic Damper Band
    G12141369Courtesy of KIA MOTORS AMERICA, INC.
  5. Install the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ JOINT ")

  6. Install the front driveshaft.

    (Refer to Driveshaft Assembly - "Front Driveshaft ")

  7. Check the front alignment.

    (Refer to Suspension System - "FRONT WHEEL ALIGNMENT ")

scientia non olet · About LEMON Manuals