LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) (PHEV) >> DTC U0111-00: Lost Communication With Battery Energy Control Module 'A' (C-CAN) >> Wiring Inspection >> Module Circuit Inspection >> Power Circuit Inspection

Power Circuit Inspection

  1. Ignition "OFF"
  2. Refer to BMS ECU and disconnect BMS connector.
  3. Ignition "ON"
  4. Measure voltage between Pin No. 1, 2 (Power) terminal of BMS harness connector and chassis ground.
  5. Measure voltage between Pin No. 3 (ON/Start Input) terminal of BMS harness connector and chassis ground.

    Specification  : B+

  6. Is measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals