| DTC Strategy |
- The BPS Rationality Diagnostic compares the difference between BPS output and calculated value to a calibration value
|
- Poor connection
- BPS
|
| Enable Conditions |
Case 1 |
- Vehicle speed is lower than 1km/h
- Engine RPM is lower than 32 RPM
- Barometric pressure is between 400hPa and 1150hPa
- MAP sensor voltage is between 0.15V and 4.85V
|
| Case 2 |
- Engine RPM is lower than 32 RPM
- Deviation between throttle air mass and cylinder air mass is lower than 550kg/h
- Intake air mass volume ranges from 50mg/stk to 550mg/stk
- Actual barometric pressure is higher than 150hPa
|
| Threshold Value |
Case 1 |
- Deviation between barometric pressure and intake air pressure is higher than 10kPa (engine stop)
- Deviation between intake air pressure (engine stop) and intake air pressure (engine idle) is lower than 20kPa
- Intake air pressure is between 55kPa and 110kPa
|
| Case 2 |
- Deviation between actual intake air pressure and model intake air pressure is higher than 20kPa and lower than -20kPa
|
| Diagnostic Time |
|
| MIL ON Condition |
|