LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 3) (PHEV) >> DTC P0191-00: Fuel Rail Pressure Sensor 'A' Circuit Range Performance >> Wiring Inspection >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect Battery (-) terminal.
  3. Refer to RAIL PRESSURE SENSOR (RPS) and disconnect Fuel Rail Pressure Sensor connector.
  4. Measure resistance between Pin No. 11 (Ground) terminal of Fuel Rail Pressure Sensor joint connector and chassis ground.

    Specification:  Approx. below 1Ω

  5. Is measured value within specification?

    YES 

    • Go to "Signal Circuit Inspection" procedure below.

    NO 

scientia non olet · About LEMON Manuals