Initializing Method Of The Safety Power Window

1. Initializing of Battery Connection

   When the battery power is removed for over 5 minutes, safety power window switch need the initializing.

   1. Power window operation before initializing
      • Manual-Up/Down function is available
      • Auto-Up function is not available

      (When holding the auto-up/down switch, window operates as a manual-up/down.)

   2. Initializing method

      Close the window from window open position, and hold the switch in window fully closed position for over 0.2 seconds.

      (Starting to close the window from window fully closed position may fail initializing.)

   3. Initializing the safety power window in jammed status may result in below condition.
   • Safety function is deactivated.
2. Initializing of fail safe mode

1. If the window is moved by compulsion and motor has a problem, the power window switch may enter the fail safe mode for user's safety.
2. Power window operation in fail mode

• Auto/Manual-Down function is deactivated.
• Auto/Manual-Up function is deactivated.

(When auto/manual-up is operated, window will rise by 20 mm and stop moving.)