Virtual Limit

Set an arbitrary virtual limit using any of the methods below since there is no separate switch limiting the operations of slide, backrest and front/rear height adjusting motors:

1. Slide recall: When there is no slide motor pulse inputted (mechanical end stop) through 6 or more pulses for 2 seconds during any operation triggered by a manual switch and memory recall operation, stop the motor immediately and set a position ahead of 6 pulses away from the position as the limit position in the driving direction (same for the opposite limit setting).

   Set Position	Virtual Limit Setting Conditions	Virtual Limit Setting Positions
   Slide	2 seconds, 6 pulses	6 pulses from restricted position
   Backrest adjustment (recline)	2 seconds, 155 pulses	155 pulses from restricted position
   Front tilt	1 second, 6 pulses	6 pulses from restricted position
   Rear height adjustment	1.5 seconds, 6 pulses	6 pulses from restricted position

   * Pulse: A waveform unit to measure revolution of a motor

2. Once a virtual limit has been set, do not perform any memory recall operation to a position out of the limit range, in order to prevent motor damage due to kinematic locking.
3. Renew the limit position if a pulse is normally inputted out of that position by memory manipulation with the limit set.

1. Slide: To set virtual limit, move seat all the way to the forward position till it stops and hold for 2 seconds, then move seat all the way to the rearward position till it stops and hold for 2 seconds.
2. Backrest adjustment (recline): To set virtual limit, move backrest all the way to the forward position till it stops and hold for 2 seconds, then move backrest all the way to the rearward position till it stops and hold for 2 seconds.
3. Front tilt: To set virtual limit, move seat all the way to the upwards position till it stops and hold for 1 second, then move seat all the way to the downwards position till it stops and hold for 1 second.
4. Rear height adjustment: To set virtual limit, move seat all the way to the upwards position till it stops and hold for 1.5 seconds, then move seat all the way to the downwards position till it stops and hold for 1.5 seconds.