LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System - 1.6L (Except HEV)) >> Boost Pressure Sensor (BPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air duct (A).
    Fig 1: Locating Air Duct With Bolts
    G12140208Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the boost pressure sensor connector (A).
  4. Remove the sensor (B) by loosening the mounting bolts.
    Fig 2: Locating Boost Pressure Sensor And Connector
    G12140209Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals