LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis - 2.4L (3 Of 3) (Except HEV) >> DTC P2017-00: Intake Manifold Runner Position Sensor/Switch Circuit High (Bank 1) >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Electrical check
  1. Poor Connector Connection
  2. Short to battery
  3. Faulty VCM position sensor
Enable Conditions
  • Battery voltage higher than 11V and lower than 16V
  • Ignition "ON"
Threshold Value
  • Port flap feedback signal is higher than 4.858V.
Diagnostic Time
  • 0.12s.
MIL ON Condition
  • 1 Driving cycle