DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy	Case 1	O2 sensor controller malfunction monitoring	Poor Connector Connection Unstable Power Faulty PCM
	Case 2	Knock acquisition check
	Case 3	Fuel injector driver boost voltage check
	Case 4	Powerstage port flap driver over temperature
	Case 5	H-bridge (ETC, port flap, wastegate) malfunction (ATIC111)
	Case 6	Output driver malfunction (ATIC140)
	Case 7	Power relay driver malfunction (ATIC139)
	Case 8	5V power supply driver malfunction (ATIC139)
Enable Condition	Case 1	Ignition "ON" Battery voltage higher than 10V and lower than 16V.
	Case 2	Engine speed higher than 32 RPM
	Case 3	Engine speed higher than 32 RPM Time delay after "Engine Running" elapsed higher than 0.3s.
	Case 4	Engine speed higher than 32 RPM Battery voltage higher than 10V and lower than 16V.
	Case 5 - 8	Ignition "ON"
Threshold Value		Error bit information from HW circuit
Threshold Value	Case 2	200rev.
	Case 3	3s.
	Case 4	0.4s.
	Case 5 - 8	1s.
MIL ON Condition		2 Driving cycles