LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Optima EX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Multi Function Camera Diagnosis (Except HEV) >> DTC C1702-46: Variant Coding Error >> DTC Inspection >> Monitor KDS/GDS Data

Monitor KDS/GDS Data

  1. Ignition "OFF"
  2. Connect KDS/GDS to Data Link Connector (DLC).
  3. Ignition "ON" & Engine "ON"
  4. Monitor "Country Code", "Left/Right hand drive", "Vehicle transmission type", "HBA Option" and "LDWS/LDWS Option parameters" in "Current Data" with KDS/GDS.

    Specification:  Refer to Fig 1 below

    Fig 1: Screen Display - LDWS Variant Coding Related Current Data
    G12134553Courtesy of KIA MOTORS AMERICA, INC.
  5. Is the parameter displayed within specification?

    YES 

    • Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
    • Repair or replace as necessary and then go to "Verification of Vehicle Repair " procedure.

    NO 

scientia non olet · About LEMON Manuals