| DTC Strategy |
- Monitoring the signal of sensor
|
- Poor connector connection
- Faulty MAFS
- Sensor contamination by foreign matter (moisture, etc.)
- Intake System blockage or damage
|
| Enable Condition |
|
| Threshold Value |
Case 1 |
- Inlet area correction value is higher or lower than the threshold value according to the atmospheric pressure and throttle opening
|
| Case 2 |
- The atmospheric correction value of air model is higher or lower than the threshold value according to the atmospheric pressure
|
| Case 3 |
- Air amount is outside the measuring range
|
| Diagnostic Time |
|
| MIL ON Condition |
|