LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Niro FE >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery System >> Fuel Pump >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the rear seat cushion.

    (Refer to Body - "REAR SEAT ASSEMBLY ")

  3. Fuel pump service cover (A).
    Fig 1: Removing Fuel Pump Service Cover
    G12335908Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the fuel pump control module connector (A).
  5. Disconnect the fuel pressure sensor connector (B).
  6. Disconnect the fuel feed tube quick-connector (C).
    Fig 2: Removing Fuel Pump Control Module Connector
    G12335909Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the fuel pump plate cover (B) by using the special service tool (A) [SST NO.:09310-B8100].
    Fig 3: Removing Fuel Pump Plate Cover
    G12335910Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the fuel pump (A).
Fig 4: Removing Fuel Pump
G12335911Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals