LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Niro FE >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery System >> Fuel Pressure Sensor (FPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to Fuel Delivery system - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  3. Remove the rear seat cushion.

    (Refer to Body - "REAR SEAT ASSEMBLY ")

  4. Remove the fuel pump service cover (A).
    Fig 1: Removing Fuel Pump Service Cover
    G12335977Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the fuel pressure sensor connector (A).
    Fig 2: Disconnecting Fuel Pressure Sensor Connector
    G12335978Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fuel pressure sensor fixing pin (A).
  7. Remove the fuel pressure sensor (B) from the fuel pump.
Fig 3: Removing Fuel Pressure Sensor Fixing Pin
G12335979Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals