Repair Procedures: Inspection

1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
   NOTE: In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ω resister must be used as shown.
   Fig 1: Checking Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground

   Courtesy of KIA MOTORS AMERICA, INC.
2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as displayed below.

Fig 2: Checking Change Of Output Voltage Of Wheel Speed Sensor To Normal Change

Courtesy of KIA MOTORS AMERICA, INC.

V_low: 0.59V - 0.84V

V_high: 1.18V - 1.68V

Frequency range: 1 - 2, 500Hz