LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Niro EX >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Door Locks >> Power Door Lock Module >> Repair Procedures >> Inspection >> Liftgate Lock Module Inspection

Liftgate Lock Module Inspection

  1. Remove the Liftgate Trim.

    (Refer to Body - "LIFTGATE TRIM ")

  2. Disconnect the connectors from the actuator.
    Fig 1: Locating Liftgate Lock Module Connector
    G12334939Courtesy of KIA MOTORS AMERICA, INC.
  3. Check actuator operation by connecting power and ground as displayed below. To prevent damage to the actuator, apply battery voltage only momentarily.
    Fig 2: Checking Actuator Operation By Connecting Power And Ground
    G12334940Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Actuator Terminal Operation Chart
    G12334941Courtesy of KIA MOTORS AMERICA, INC.
  4. Checking the liftgate of the vehicle power option power refers to the liftgate module.