LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> K900 V8 Luxury >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Open the trunk.
  2. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  3. Remove the floor mat in the trunk (Refer to Body - "TRUNK TRIM ").
  4. Remove the Partition board trim (A).
    Fig 1: Removing Partition Board Trim
    G11802965Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the service cover (A).
    Fig 2: Removing Service Cover
    G11802966Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the canister close valve connector (A).
  7. Disconnect the vapor hose (B) from the canister.
  8. Remove the fuel tank air filter mounting bolt (C).
  9. Remove the canister close valve mounting bolts (D).
  10. Remove the canister close valve from the fuel tank air filter.
    Fig 3: Removing Canister Close Valve From Fuel Tank Air Filter
    G11802967Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals