LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> K900 V8 Luxury >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Power Trunk Module >> Power Trunk Module Drive Unit >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Put on gloves before removing/installing the drive unit.
  • Do not carry or install push rod, controller and wire harnesses by holding them with bare hands.
  • When removing the push rod, be careful as the trunk may close.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the LHS trunk trim after opening the trunk.

    (Refer to Body - "TRUNK TRIM ")

  3. Separate the power trunk module push rod pin (A) and then remove the power trunk module connecting rod (B).
    Fig 1: Separating Power Trunk Module Push Rod Pin
    G11803846Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power trunk module & drive unit (A) after removing the drive unit mounting bolts, nuts and connector.
Fig 2: Removing Drive Unit Mounting Bolts
G11803847Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals