LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> K900 V6 Luxury >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Open the trunk.
  2. Turn the Ignition Switch OFF and disconnect the battery negative (-) terminal.
  3. Remove the floor mat in the trunk (Refer to Body - "TRUNK TRIM ").
  4. Remove the Partition board trim (A).
    Fig 1: Locating Partition Board Trim
    G11805045Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the service cover (A).
    Fig 2: Locating Service Cover
    G11805046Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the canister close valve connector (A).
  7. Disconnect the vapor hose (B) from the canister.
  8. Remove the fuel tank air filter mounting bolt (C).
  9. Remove the canister close valve mounting bolts (D).
  10. Remove the canister close valve from the fuel tank air filter.
Fig 3: Locating Canister Close Valve Connector, Vapor Hose And Canister Close Valve Mounting Bolts
G11805047Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals