Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the engine cover.
Disconnect the ignition coil connector (A).

Fig 1: Disconnecting Ignition Coil Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the ignition coil (A) after loosening the mounting bolt.

Ignition Coil Mounting Bolt:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Fig 2: Removing Ignition Coil Mounting Bolt

Courtesy of KIA MOTORS AMERICA, INC.

NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

Fig 3: Pulling Lock Pin

Courtesy of KIA MOTORS AMERICA, INC.