LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte5 EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Brake System) >> Brake Pedal >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the bushing for wear.
  2. Check the brake pedal for bending or twisting.
  3. Check the brake pedal return spring for damage.
  4. Check the stop lamp switch.
    1. Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.
    2. The stop lamp switch is in good condition if there is no continuity when plunger (A) is pushed.
    Fig 1: Checking Plunger Continuity
    G12166349Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals