LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System - 2.0L GDI) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Connect the KDS/GDS on the Data Link Connector (DLC).
  2. Measure the output voltage of the RPS at idle and various engine speed.
Fig 1: Rail Pressure Sensor Output Voltage Graph
G12162463Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals