LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System - 2.0L GDI) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Disconnecting Engine Coolant Temperature Sensor Connector
    G12162412Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the Engine coolant temperature sensor.

    Engine Coolant Temperature Sensor Mounting: 

    29.4 - 39.2 N.m (3.0 - 4.0 kgf.m, 21.7 - 28.9 lb.ft)

scientia non olet · About LEMON Manuals