LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Hydraulic System - 2.0L GDI) >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" Ignition.
  2. Remove the Battery and Battery Tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the main connector (A).
    Fig 1: Disconnecting Main Connector
    G12163448Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between power terminal (5) and signal terminal (17).

    Specification  : 5.3 ± 0.3 Ω

    Fig 2: Solenoid Valve Connector Terminals
    G12163449Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals