LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte S >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Electronic Stability Program (Esp) System) >> Rear Wheel Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tire.
  2. Disconnect the wheel speed sensor connector (A).
    Fig 1: Locating Wheel Speed Sensor Connector
    G12329919Courtesy of KIA MOTORS AMERICA, INC.
  3. Loosen the bearing bolts (A) and then remove the hub bearing assembly.

    Tightening Torque: 

    88.2 - 107.8 N.m (9.0 - 11.0 kgf.m, 65.0 - 79.5 lb.ft)

    Fig 2: Locating Bearing Bolts
    G12329920Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals